Tevfik Oğuzhan ERGÜDER

Dedicated and driven professional with a strong academic background and practical experience in mechanical engineering, specifically in the field of additive manufacturing. Holds a master's degree in automotive engineering from Erzincan, and currently pursuing a doctorate at Erzurum Technical University, supported by the YOK 100/2000 scholarship. Over the past four years, gained substantial expertise in additive manufacturing, complemented by ongoing involvement in the TUBITAK 1004 project. Primary goal is to continuously enhance skills and knowledge in this dynamic field.

• Wear behavior of Ni-B coated-hard anodized Al7Si alloy and machining performance with ZrN ceramic film coated carbide tool, Surfaces and Interfaces, 21, 100768, Işıldak Y. E., Ergüder, T. O., Kaya, G., Hacısalihoğlu, İ., Yay, B., Yıldız, F., 2020
• Tribological and thermal properties of plasma nitrided Ti45Nb alloy, Surfaces and Interfaces, 22, 100893, Hacısalihoğlu, İ., Kaya, G., Ergüder, T. O, Mandev, E., Manay, E., Yıldız, F., 2021
• Wear and Thermal Behavior of TiAlN Thin Films onto Ti6Al4V Alloy Manufactured by Selective Laser Melting Method, 3D Printing and Additive Manufacturing, 2021, Kaya, G., Ergüder, T. O, Hacısalihoğlu, İ., Mandev, E., Manay, E., Yıldız, F.
• Investigation of the Structural and Tribological Properties of 316L Stainless Steel Manufactured Using Variable Production Parameters by Selective Laser Melting, Journal of Materials Engineering and Performance, 1-16, Gençoğlu, U., Kaya, G., Ergüder, T. O., Hacısalihoğlu, İ., Yıldız, F., 2022
• Improvement of structural/tribological properties and milling performances of tungsten carbide cutting tools by bilayer TiAlN/TiSiN and monolayer AlCrSiN ceramic films, Ceramics International, 48, 18, 26342-26350, Çam, A. S., Ergüder, T. O, Kaya, G., Yıldız, F., 2022
• Tribological and machining performance of tungsten carbide cutting tool material coated with different carbon nitride films, International Journal of Surface Science and Engineering, 16, 3, 258-275, Dumlu, F., Ergüder, T. O, Kaya, G., Hacısalihoğlu, İ., Yildiz, F., 2022
• Effects of build orientation and hatch spacing on high-speed milling behavior of L-PBF 316L stainless steel, Materials Testing, 65, 10, 1571-1581, Kaya G., Köklü U., Ergüder, T. O, Cengiz F., Yıldız F., 2023
• Effects of process parameters on selective laser melting of Ti6Al4V-ELI alloy and parameter optimization via response surface method, Materials Science and Engineering: A, 2023, Kaya, G., Yıldız, F., Korkmaz, İ. H., Kaymaz, İ., Yetim, A. F., Ergüder, T. O, Şen, Ç.
• The Effect of Milling Time and Hot-Pressing on the Structural Properties and Wear Behavior of CoCrFeMnNi High-Entropy Alloys Fabricated by Mechanical Alloying, High Temperature Corrosion of Materials, 1-25, Bulut, C., Yıldız, F., Varol, T., Akçay, S. B., Ergüder, T. O, 2023
• Effect of titanium on the structural, mechanical and surface properties of CoCrFeMnNiTix high entropy alloy fabricated by selective laser melting, Intermetallics, 169, 108281, Bulut, C., Yıldız, F., Varol, T., Ergüder, T. O, 2024

• Erzincan’da Motorlu Taşıtlar Tarafından Atmosfere Bırakılan Egzoz Emisyonları ve Tahmini Miktarlarının Belirlenmesi, Erzincan University, Journal of the Institute of Science and Technology, 13, 3, 1403-1412, Çetin, M., Ergüder, T. O.

• Taşıt Klima Sistemleri, Atıkları ve Çevre Kirliliği Etkileri, 8. International Vocational Schools Symposium, 1, 167-175, Çetin M, Ergüder T. O., Niyazoğlu M., 11-13 June 2019, Sinop
• Niversitesi, Sinop
• Taşıt Tamirhanelerinde Hava Kirliliği Problemleri ve Çözüm Önerileri, 8. International Vocational Schools Symposium, 1, 176-184, Çetin M, Ergüder T. O., Niyazoğlu M., 11-13 June 2019, Sinop
• The Effects of Selective Laser Melting Process Parameters on Thermal Conductivity of 316L Stainless Steel, 1st Internatıonal Conference on Advances In Engıneerıng, Archıtecture, Scıence And Technology (ICA-EAST), 691-697, Gençoğlu, U., Ergüder T. O., Kaya, G., Hacısalihoğlu, İ., Mandev E., Yıldız, F., 15-17 December 2021, Erzurum Technical University, Erzurum/Turkey
• An Approach for Determınıng the Optimum Laser Power and Scannıng Speed in The SLM Process of Nıckel-Plated WC Powders, The 5th International Conference of Materials and Engineering Technology (TICMET'23), 321-330, Ergüder T. O., Güler O., Yıldız F., 13-16 November 2023, Trabzon/Turkey
• Selective Laser Melting of CoCrFeMnNi High Entropy Alloy: Effect of Laser Power and Scanning Speed, The 5th International Conference of Materials and Engineering Technology (TICMET'23), 331-344, Bulut, C., Varol, T., Ergüder T. O., Yıldız, F., 13-16 November 2023, Trabzon/Turkey

ICP-RIE Basic User Training

• Mechanical Engineering
• Construction and Manufacturing
• Tribology
• Materials
• Advanced and Intelligent Manufacturing
• Additive Manufacturing
• Selective Laser Melting
• Machining

• 2022, Ongoing, Project Manager, TUBITAK 1002 Electroless Using Selective Laser Melting Method Development of Ni Coating Supported Tungsten Carbide Cutting Tools
• 2021, Ongoing, Scholarship, TUBITAK 1004 New Generation 3D Printer Manufacturing Technologies Platform

• Prof. Dr. Fatih YILDIZ, Erzurum Technical University
• Prof. Dr. İrfan KAYMAZ, Erzurum Technical University